# Keycloak X distribution import configuration issue

**URL:** <https://forum.keycloak.org/t/keycloak-x-distribution-import-configuration-issue/8583>\
**Category:** Miscellanaeous\
**Created:** [April 19, 2021, 6:41pm UTC](https://forum.keycloak.org/t/keycloak-x-distribution-import-configuration-issue/8583 "2021-04-19T18:41:31Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![ygtysr](https://avatars.discourse-cdn.com/v4/letter/y/f07891/32.png) [@ygtysr](https://forum.keycloak.org/u/ygtysr)\
**Post date:** [April 19, 2021, 6:41pm UTC](https://forum.keycloak.org/t/keycloak-x-distribution-import-configuration-issue/8583/1 "2021-04-19T18:41:31Z")

</div>

Hi all,  
I using Keycloak in docker container. Its works very well, no problem until here but has a little bit high resource consumption. I made some investigation and found the Keycloak-X server distribution. It based on quarkus stack instead of wildfly. The main goal of this version is consume much more less resources. So I decided to test. I could able to run it but I could not import my realm file properly. When I tried to import configurations into the server, it crashed at the first time, but if I run server again it successfully import and launch. You can see the command that I used;

_ **./kc.sh import --file=/home/ygtysr/test/loginservice/docker/rsc/MY\_REALM.json --override=false --profile=dev** _

So here is my question; How can I import my realm configuration during at the initial stage.  
I could able to do it with on Wildfly core stack;

_ **./standalone.sh -Dkeycloak.migration.action=import -Dkeycloak.migration.provider=singleFile -Dkeycloak.migration.file=/opt/jboss/rsc/MY\_REALM.json -Dkeycloak.migration.strategy=IGNORE\_EXISTING** _

What is the corresponding command for quarkus stack.  
Thanks,  
Yigit

---

<div class="post-metadata">

**Author:** ![yagizonen](https://avatars.discourse-cdn.com/v4/letter/y/f475e1/32.png) [@yagizonen](https://forum.keycloak.org/u/yagizonen)\
**Post date:** [April 26, 2021, 6:24am UTC](https://forum.keycloak.org/t/keycloak-x-distribution-import-configuration-issue/8583/3 "2021-04-26T06:24:02Z")

</div>

Hey,  
I have the similar problem in the project i am working on. Did you find any solution?

Best Regards,  
Yagiz

---

<div class="post-metadata">

**Author:** ![ygtysr](https://avatars.discourse-cdn.com/v4/letter/y/f07891/32.png) [@ygtysr](https://forum.keycloak.org/u/ygtysr)\
**Post date:** [April 29, 2021, 7:43am UTC](https://forum.keycloak.org/t/keycloak-x-distribution-import-configuration-issue/8583/4 "2021-04-29T07:43:09Z")

</div>

Hey @yagizonen unfortunately I did not found any solutions, I hope community will support ASAP 🙂

---

<div class="post-metadata">

**Author:** ![uesleilima](https://yyz2.discourse-cdn.com/free1/user_avatar/forum.keycloak.org/uesleilima/32/4341_2.png) [@uesleilima](https://forum.keycloak.org/u/uesleilima)\
**Post date:** [November 9, 2021, 2:06pm UTC](https://forum.keycloak.org/t/keycloak-x-distribution-import-configuration-issue/8583/5 "2021-11-09T14:06:40Z")

</div>

I’m facing the same issue, any progress update here guys?

---

<div class="post-metadata">

**Author:** ![mgoericke](https://yyz2.discourse-cdn.com/free1/user_avatar/forum.keycloak.org/mgoericke/32/4203_2.png) [@mgoericke](https://forum.keycloak.org/u/mgoericke)\
**Post date:** [November 15, 2021, 10:38am UTC](https://forum.keycloak.org/t/keycloak-x-distribution-import-configuration-issue/8583/6 "2021-11-15T10:38:30Z")

</div>

Hey,

you could use the **kcdam** (Keycloak Admin CLI) instead of the new (but not properly working) **kc** cli to import the realm.

Please check out my repository: [GitHub - mgoericke/keycloak-x-importer: Import realms into Keycloak distribution x container](https://github.com/mgoericke/keycloak-x-importer)

It’s just a simple example but it shows how you can import realms into the “Keycloak.X” on startup using **kcadm**. the container becomes heathy after the import of your realm